[SID 2018] OLEDON, presented about X-mixing plane source deposition technology for AMOLED efficiency enhancement.

In SID 2018, Hwang Chang-Hoon, CEO of OLEDON, announced a new plane source FMM deposition technology that can produce ultra-high resolution AMOLED of 2,250 ppi.

According to the announcement, the linear source currently applied to mass production has a problem of causing superimposition of fine adjacent patterns in a high resolution implementation due to a shadow distance of 3 μm. But Hwang said he succeeded in reducing the shadow distance of the patterns by 0.18 um using plane source, which is the smallest shadow distance ever introduced.

<Shadow effect comparison between current process and the process applied with the plane source, Source: OLEDON>

Hwang added that he developed ‘X-mixing’ technology in which the host and dopant thin films were separately deposited on the metal surface and then the host molecules and dopant molecules were automatically diffused through the plane evaporation to form the light emitting layer. Hwang commented, “It is not easy to control the composition of the dopant by using the linear source evaporation technology, which vaporizes the host material and the dopant material at the same time. However, since X-mixing technology can control the composition, it is possible to achieve a material utilization rate up to 4 times higher than the conventional method.”

<SIMS data comparison between the emitting layer deposited by conventional method and the emitting layer deposited by the plane source, Source: OLEDON>

<Dopant gradient data of the emitting layer applied with X-mixing technology, Source: OLEDON>

Hwang said, “In case of green OLED produced by X-mixing technology, 40% improvement in the emitting efficiency was verified, compared to the existing technology. OLEDON is currently under development of the optimized X- mixing development for forming exciton and the mask aligner with new concept sub-micron precision.

<Luminance data for green OLED produced by X-mixing technology and green OLED produced by the conventional method, Source: OLEDON>

Finally, Mr. Hwang mentioned that based on the development results, he plans to install a plane source FMM evaporator capable of manufacturing ultra-high resolution micro OLED devices in Dankook University.  (Reference: OLEDON homepage: www.oledon.co.kr)

[SID 2018] OLEDON, AMOLED 효율 향상용 X-mixing 면소스 증착 기술 발표

SID 2018에서 OLEDON의 황창훈 대표는 2,250ppi의 초고해상도 AMOLED를 제작 할 수 있는 새로운 면소스 FMM 증착기술을 발표했다.

발표에 따르면, 현재 양산에 적용 중인 리니어 소스는 3um의 섀도우 거리(shadow distance)로 인해 고해상도 구현 시 미세 인접 패턴들의 중첩을 발생시키기는 문제가 발생한다. 하지만 황대표는 면소스를 이용해 패턴들의 섀도우 거리를 0.18 um까지 줄이는데 성공하였다고 밝혔으며, 이는 현재까지 발표 된 섀도우 거리 중 가장 최소의 섀도우 거리라고 설명했다.

<기존 공정과 면소스를 이용한 공정의 섀도우현상(shadow effect) 비교, Source: OLEDON>

아울러 황대표는 호스트박막과 도판트박막을 따로 금속면에 증착 한 후 면증발을 통해 호스트 분자와 도판트 분자가 자동 확산되어 발광층이 형성되는 ‘X-mixing’기술을 개발하였다고 발표하였다. 황대표는 “기존 기술인 호스트 물질과 도판트 물질을 동시에 기화되는 리니어 소스 증착기술로는 도판트의 조성 제어가 쉽지 않으나, X-mixing 기술은 조성 제어가 자유자재로 가능하기 때문에 기존 대비 4배까지 향상 된 물질 사용률 달성이 가능하다”고 밝혔다.

<기존방식으로 증착 된 발광층과 면소스로 증착 된 발광층의 SIMS 데이터, Source: OLEDON>

<X-mixing 기술로 얻은 발광층의 dopant gradient 데이터, Source: OLEDON>

황대표는 “X-mixing 기술로 제작한 green OLED의 경우 기존 기술보다 40% 향상 된 발광효율을 확인하였다”고 언급하며 “OLEDON은 현재 소자의 발광효율향상을 목적으로 엑시톤형성의 최적화 된 X-mixing 개발과 신개념의 sub-micron 정밀도를 지닌 mask aligner를 개발 중”이라고 밝혔다.

<X-mixing 기술로 제작 된 green OLED와 기존 방식으로 제작 된 green OLED의 발광 데이터, Source: OLEDON>

마지막으로 황대표는 이번 개발결과를 토대로 초고해상도 마이크로 OLED 소자의 제조가 가능한 연구용 면소스 FMM 증착기를 단국대학교내에 설치할 계획이라고 언급했다. (참고:OLEDON사의 홈페이지 www.oledon.co.kr)