OLED, the mainstream of HMD devices for VR

The ‘PlayX4’ opening ceremony, a next-generation augmented game show, was held at Kintex exhibition hall 2, Ilsan, Goyang, Gyeonggi-do on the 25th. During the event, a number of companies presented VR contents, using HMD (head mounted display) devices in application of OLED, such as Oculus Rift, HTC Vive and Gear VR to improve immersion and reduce motion sickness.

Realitymagiq, a professional of VR game developer, introduced a multiplay game. In reply to a question on immersion into VR, “Device performance is essential for immersive in VR, and to reduce latency, the major culprit for sickness, OLED is more than enough,” said Kim Sung-kyun, the CEO of Realitymagiq. “However, resolution needs to be further developed and so does GPU performance.”

 

 

Motionhouse Co., Ltd. has introduced MotionGear for users to experience tilting and engine vibration during actual driving. Oculus Rift OLED-applied headset, was used; “Oculus Rift was the one that could minimize the motion sickness most”, said a participant.

 

 

Latency refers to the time length for the CPU to receive information from the tracker and output, which is related to the response time of the display and the information processing of the graphics card. The response time of the display required in VR is known to be less than 3ms. Samsung Display compares the response time between OLED and LCD on the blog and emphasizes that OLED is the optimal display for VR HMD device.

 

The Response time between OLED and LCD, Source: blog.samsungdisplay.com

 

In fact, many VR content companies used OLED-applied HMD devices such as Oculus Rift, HTC Vive, and Gear VR, and users seemed to enjoy VR game, not suffering from dizziness

Recently, aside from Oculus Rift and HTC Vive, many HMD makers such as recently launched Sony’s PS VR and Royole’s Royole Moon are OLED-based, not LCD, and surely the OLED application is expected to expand further.

[SID 2017] OLEDON, 단국대학교와 공동으로 차세대 초고해상도 패터닝 증착기술 개발 성공

OLEDON

지난 SID 2017에서 단국대학교의 진병두 교수와 단국대학교 겸임 교수이자 OLEDON의 대표인 황창훈 박사는 0.38 um의 shadow distance(SD) 구현이 가능한 면소스 패터닝 증착 기술 개발에 성공했다고 발표했다.

황창훈 대표는 과거 2016 IMID Business forum에서 면소스 패터닝 증착 기술과 100 um두께의 shadow mask로 1.1 um의 shadow distance 구현에 성공했다고 발표한 바 있다. 당시 황창훈 대표는 ‘Step height를 3 um까지 줄인다면 이론상 shadow distance를 0.38 um까지 구현할 수 있어 OLED panel의 해상도는 2250ppi이상 가능해질 것이다’고 설명한 바 있다.

이 발표는 실제 plane source를 적용하여 SD를 0.38um까지 구현한 실질적인 결과이므로, 양산 적용 가능성을 한층 높인다는 점에서 이번 SID 2017에 참석한 업계 관계자들의 큰 관심을 모았다.

현재의 OLED panel 양산 기술은 약 3 um의 shadow로 인해 QHD(약 600ppi) 이상의 해상도를 구현하는데 한계가 있다. 3 um shadow는 UHD급(800ppi이상) AMOLED 패터닝 공정 시, 미세 인접 패턴들의 중첩을 발생시켜 미세패턴밀도를 향상을 저하시킨다. 이로 인해 현재 OLED panel은 QHD급만 생산되고 있다.

OLEDON이 개발한 면소스 패터닝 증착기술이 양산에 적용된다면 shadow 거리를 0.38~0.56 um까지 줄일 수 있어 해상도를 기존보다 약 8배 향상할 수 있다. 또한, 향후 스케일업 개발을 통해 대면적 OLED 디스플레이 생산산업에 응용된다면 3300ppi 이상의 초고해상도를 가지는, 수퍼울트라(SUHD) 해상도를 가지는 마이크로 AMOLED소자의 제조가 가능하다.

 

<면소스 증착기술로 얻은 세도우 데이터>

 

황창훈 대표는 ‘고 진공환경에서 금속면에 유기물을 1차 증발, 증착하여 유기분자박막을 형성한 후, 이를 재 증발하여 기판에 2차 코팅 증착하는 아이디어를 활용하여 유기물 분자빔의 증발각을 최소화하는 조건을 발견하게 되었다’라고 밝혔다.

 

<SID2017에서 황창훈 대표가 발표한 면소스의 원리>

 

최근 디스플레이의 해상도에 대해 많은 관심이 집중되고 있어, OLEDON의 연구결과는 업계에 큰 파장을 불러올 것으로 전망된다.

한편, 황창훈교수는 증착기 전문 업체를 거쳐 25년동안 신개념의 증착기술을 개발해오고 있으며, 면소스 증착기술의 원천특허(하향식 열적유도 증착에 의한 선형의 유기소자 양산장비: 등록번호 101206162000)를 보유하고 있다.

가상현실용 HMD 기기의 대세가 된 OLED

차세대 융•복합 게임쇼 ‘플레이엑스포(PlayX4)’의 개막식이 25일 경기도 고양시 일산 킨텍스 제2전시장에서 열렸다. 행사 현장에서는 다수의 기업들이 가상현실 컨텐츠를 선보였으며, 몰입감 향상과 멀미 현상을 저감하기 위해 Oculus Rift과 HTC Vive, Gear VR 등 OLED가 적용 된 HMD(head mounted display) 기기를 사용했다.

가상현실 게임 전문 개발사인 Realitymagiq는 멀티 플레이 게임을 선보였다. 디스플레이와 가상현실 몰입감 질문에 Realitymagiq의 김성균 대표는 “가상현실의 몰입감을 위해서는 기기 성능이 중요하고, 멀미를 일으키는 주요 원인인 latency를 줄이기 위해서는 OLED면 충분하다”며, “다만, 몰입감을 위해서는 해상도가 좀 더 발전되어야 하고 GPU 성능도 개선되야 한다”라고 설명했다.

 

 

주식회사 Motionhouse는 실제 드라이빙 때 발생하는 차체의 기울어짐이나 엔진 진동등을 체험할 수 있는 MotionGear를 선보였다. 가상현실용 헤드셋은 OLED가 적용 된 Oculus Rift이 사용 되었으며, 업체 관계자는 “어트랙션 적용 시 멀미 발생이 제일 적은 제품이 Oculus Rift이었다”고 언급했다.

 

 

Latency란 CPU가 tracker로부터 정보를 입력 받아 콘텐츠를 출력하기 까지의 소요 시간을 일컫는 말로 디스플레이의 응답속도와 그래픽 카드의 정보 처리 속도 등과 관련이 있다. 가상현실에서 요구되는 디스플레이의 응답 속도는 3ms 이하로 알려져 있으며, Samsung Display는 블로그에서 OLED와 LCD의 응답속도를 비교하며 OLED가 가상현실용 HMD 기기에 최적의 디스플레이임을 강조했다.

 

<LCD와 OLED의 응답속도 비교, Source: blog.samsungdisplay.com>

 

실제로 현장에서는 다수의 VR 컨텐츠 업체들이 Oculus Rift과 HTC Vive, Gear VR 등 OLED가 적용 된 HMD 기기를 사용했으며, 이용자들도 어지러움 없이 가상현실 컨텐츠를 즐길 수 있었다고 언급했다.

최근 Oculus Rift와 HTC Vive 외에도 최근 출시 된 Sony의 PS VR과 Royole의 Royole Moon 등 다수의 HMD 제작 기업들이 LCD가 아닌 OLED를 기반으로 한 HMD 기기를 출시하는 등, 가상현실 기기에서 OLED의 사용이 더욱 더 확대 될 것으로 예상된다.

[SID 2017] BOE, 세계 최초 진정한 의미의 QLED 전시

BOE

BOE는 25일(현지시각) 미국 로스앤젤레스에서 열린 SID 2017에서 세계 최초로electroluminescence quantum dot 기술이 적용된 QLED 디스플레이 2종(5 inch, 14 inch)을 선보여 관람객의 큰 관심을 끌었다.

BOE의 5 inch QLED 디스플레이는 320 x 240 (80ppi) 해상도를 가지며 LTPS TFT가 적용되었다. 한편, 14 inch QLED 디스플레이의 해상도는 960 x 540 (80ppi)이며, oxide TFT가 적용되었다.

<BOE가 전시한 5 inch (좌), 14 inch (우) QLED 디스플레이>

 

이번에 공개된 BOE의 QLED 디스플레이가 특별한 까닭은 그간 삼성전자의 ‘photoluminescence quantum dot 기술’이 적용된 SUHD TV와는 달리, 백라이트가 없는 ‘electroluminescence quantum dot 기술’이 적용된 디스플레이기 때문이다.

일반적으로 quantum dot을 이용하는 디스플레이는 메커니즘은 2가지(photoluminescence quantum dot 기술과 electroluminescence quantum dot 기술)로 분류된다.

Photoluminescence quantum dot 기술은 외부 광에 의해 자극된 물질이 다시 빛을 내는 메커니즘을 갖는다. 삼성전자는 이 기술을 백라이트에서 나오는 청색 빛에 QD sheet를 붙인 형태로 활용하여 LCD TV에 적용하고 있다.

이에 반해 electroluminescence quantum dot 기술은 전기를 가했을 때 스스로 빛을 내는 메커니즘으로 빛을 내는 재료만 무기물이고 구조는 OLED와 흡사하다.

유비산업리서치 이충훈 대표는 과거 analyst column을 통해 ‘photoluminescence quantum dot 기술은 디스플레이의 색 재현율을 향상하기 위해 현재 LCD TV에 적용하고 있다’며, ‘LCD TV로서 최상의 제품임에 틀림없지만, electroluminescence quantum dot 기술이 적용된 것이야 말로 진정한 의미의 QLED 디스플레이다’라고 말한 바 있다.

BOE 관계자는 QLED 디스플레이에 대해 ‘기존의 OLED 구조에 유기물 대신 무기물을 사용하여 신뢰성을 향상시켰으며, 색재현율이 OLED 대비 넓은 것이 특징’이며, ‘100% 잉크젯 프린팅 방식으로 제작하는 QLED는 증착법으로 제작하는 OLED에 비해 제조 비용 절감과 대면적에 유리하다’고 설명했다.

그간 업계에서는 QLED 디스플레이가 양산에 적용되기까지는 최소 5년 이상 걸릴 것으로 예상하고 있기 때문에, BOE의 이러한 연구결과 electroluminescence quantum dot 기술이 적용된 QLED의 상용화를 얼마나 앞당길 수 있을지 또는 디스플레이 산업에 어떠한 영향을 미칠지 귀추가 주목된다.

[SID 2017] BOE, Unveiled the World’s First True QLED

BOE attracted the big attention of visitors by unveiling the world’s first 2 types of QLEDs(5 inch, 14 inch) based on electroluminescence quantum dot technology.

BOE’s 5 inch QLED has a resolution of 320 x 240 (80ppi) with LTPS TFT. On the other hands, 14 inch QLED has a resolution of 960 x 540 (80ppi) with oxide TFT.

 

<BOE’s 5 inch (left) & 14 inch (right) QLED display>

 

BOE’s QLED display this time is special because it is an ‘electroluminescence quantum dot technology’-based display without backlight, unlike Samsung Electronics’ SUHD TV based on ‘photoluminescence quantum dot’.

In general, quantum dot-based displays are categorized into two types of mechanisms: photoluminescence quantum dot and electroluminescence quantum dot.

Photoluminescence quantum dot technology has a mechanism where the material stimulated by external luminescence emits light again. Samsung Electronics applies this technology to its LCD TV by using the QD sheet attached on blue light emitting from backlight.

On the other hands, electroluminescence quantum dot technology has a mechanism that emits itself when electricity is put, and its material is inorganic and structure is similar to OLED.

Choong Hoon Yi, president of UBI Research said in analyst column that “photoluminescence quantum dot technology is applied to current LCD TVs to improve color reproduction of display. It must be the best product as LCD TV, but electroluminescence quantum dot-based display is a true QLED display”

A BOE employee explained “QLED display improves its reliability by using inorganic matters for existing OLED structure instead of organic matters, featuring better color gamut than OLED. 100% inkjet printing-based QLED is better in terms of manufacturing cost saving and large scale, compared to deposition-based OLED”.

The industry has expected that it will take more than 5 years to mass-produce QLED display, so according to BOE’s research, there’s a keen interest on how much the commercialization of electroluminescence quantum dot-based QLED is moved up or how much it influences the display industry.

2017 Q1 AMOLED Performance Analysis

According to UBI Research, sales of AMOLED in the first quarter of 2017 were US$ 4.31 billion, up 15% from the same quarter last year (Q1 2016). Shipments amounted to 99.1 million units, up 9% from the same period last year.

AMOLED accounted for 88% of smartphone sales and 7% of TV sales. Especially, TV sales market share grew by 5% YoY and it shows big growth of OLED TV market.

With Samsung Electronics’ Galaxy S8 and S8+ launches and mass production of AMOLED panels for Apple, and joining OLED TV market of Japanese companies such as Sony, Toshiba and Panasonic, the AMOLED market will continue to grow even after Q2. Mobile AMOLEDs are expected to ship more than 100 million units each quarter, and TV AMOLEDs are expected to ship more than 300,000 units per quarter.

UBI Research estimates that the total AMOLED market will grow to a CAGR of 33% by 2020, reaching US$ 59.3 billion.

 

<Total AMOLED market sales forecast>

 

JOLED, Production of 21.6 inch OLED by the world’s first inkjet printing process

JOLED announced on last 17th that it developed the world’s first 21.6 inch 4K OLED panel with RGB inkjet printing process and shipped the prototype from April.

Developed by JOLED’s RGB inkjet printing process, the thickness of the panel is 1.3mm, weighs 500g, brightness is 350cd/m2, and contrast ratio is 1,000,000: 1. According to JOLED, this panel was applied to medical monitors.

<21.6 inch OLED and its specifications developed by JOLED, source: JOLED>

 

JOLED said ‘Ink-jet printing is a technology for printing by applying a light emitting material, which the production process is simple and easy to expand to diverse screen size, so it has been put into practical use. The top emission, viewing angle and color reproducibility of OLED panels will be improved.’

 

In addition, JOLED has announced its plans for the future ‘to expand its inkjet printing-type small and medium-sized OLED applications (such as gaming monitors, automotive applications, etc.) or suppliers continuously.’

JOLED is a company established by INCJ, JDI, Sony and Panasonic, and is actively developing inkjet printing process. Among the panel makers, JOLED is the only company that has released a product developed by inkjet printing process in 2016.

 

<55inch 4K flexible AMOLED panel unveiled by JOLED in 2016>

 

According to Ubi research’s ‘ Market Entry Analysis for Solution Process OLED -The Possibilities and Opportunities‘, ink-jet printing is one of the process methods of the solution process, in which the ink-jet head is used to drop ink onto each pixel. Major panel makers are developing a solution process using this process, and JOLED is expected to take a lead in the future.

The solution process is capable of realizing large-area OLED panel with RGB pixel structure in Gen8 and above, has high material utilization efficiency, and is developed as a simple layer, which is advantageous in cost reduction in mass production success.

Meanwhile, Lee Choong-hoon, CEO of UBI Research, said, “Although the large-area OLED market is targeting the premium market with the WRGB method, the solution process will be the core technology since low-cost and high-production technology is key to replacing LCDs with OLEDs.”

[SID 2017] Samsung Display, Unveil the world’s first 9.1inch Stretchable AMOLED

Samsung Display unveiled the world’s first 9.1inch stretchable AMOLED, including touch, on SID 2017, boasting the world’s best AMOLED technology.

In addition to presenting a paper entitled “9.1-in-stretchable AMOLED display based on LTPS technology” at SID 2017 symposium, Samsung Display has attracted great interest in visitors by exhibiting real objects in the future display zone at Samsung Display’s.

In this 9.1 inch stretchable AMOLED, the PI is formed on the shrinkable film substrate, and then the stretchable region is patterned. And it is structured that TFT and OLED are formed on the patterned PI, and multi-touch sensor is realized at the same time.

 

<9.1inch stretchable AMOLED structure of Samsung Display>

 

In addition, stretchable AMOLEDs can be implemented in both convex and concave shapes, and up to 12 mm in concave shapes.

Stretchable display is the final technology of flexible display, so it is expected to be applied to various fields such as clothing and human skin because it does not receive any form restrictions and it is expected to create applications for new areas.

Samsung Display, which is leading the AMOLED market for mobile devices with flexible AMOLED, is expected to maintain its technological gap with latecomers once again, and also is expected how would it stimulate latecomers who are pursuing AMOLED technology at high speed.

 

<Samsung Display’s exhibition booth with 9.1inch stretchable AMOLED>

<9.1inch stretchable AMOLED specification of Samsung Display>

<9.1inch stretchable AMOLED displayed by Samsung Display, Source: Samsung Display>

 

[SID 2017] Premium TV market, LCD vs OLED war re-ignition

In the premium TV market in 2017 OLEDs seemed to catch up early with LG Electronics’ OLED TV sales volume growth and Sony’s OLED TV market gains. However, with the announcement of AUO, Taiwan’s leading LCD maker, that LCDs are more advantageous in the premium TV market than OLEDs, once again, competition between OLED TVs and LCD TVs is expected to intensify.

In the keynote session of SID 2017 held in Los Angeles, USA from May 22, AUO CEO Paul Peng made a presentation with the theme of “The warring states of display technologies” that LCDs would continue to outperform OLEDs in the premium TV market.

Paul Peng has three major claims that LCD is more dominant.

First is the performance that LCD is superior to OLED in terms of maximum size, peak brightness, ambient contrast ratio, color gamut, image sticking, and lifetime.

Second is the cost. In the black Friday in 2016, 65-inch HDR 4K narrow bezel LCD TV was US $ 1,099, while OLED was more than double with US $ 2,800.

Lastly, eco friendly. The industrial water used in the manufacturing process is used more for OLED manufacturing than LCD, and the power consumption of OLED is about twice that of LCD. The replacement cycle is 2 to 4 years for OLED, but LCD is 5 to 8 years which is more than twice as high as LCD, so is more environmentally friendly than OLED.

Since the launch of OLED TVs, there has been intense competition between LCD and OLED camps, but OLED market share continues to rise in the premium mobile market, and even in the premium TV market OLED seemed to be ahead of LCD. However, with AUO’s announcement in the keynote of SID 2017, the world’s largest display society, it is expected to intensify the fierce battle between OLED and LCD in the display industry.

  

 

2017년 1사분기 AMOLED 실적 분석

유비산업리서치는 2017년 1사분기 AMOLED 매출액이 43.1억 달러로 전년 동기(2016년 1사분기) 대비 15% 증가했다고 밝혔다. 출하량은 9,910만대로 집계 되어 전년 동기 대비 9% 증가한 것으로 나타났다.

AMOLED의 매출액 점유율은 smartphone 88%, TV 7% 순으로 나타났다. 특히 TV 매출액의 점유율은 전년 동기 대비 5% 증가하여 OLED TV 시장이 크게 성장하고 있음을 보여주고 있다.

삼성전자의 갤럭시S8, S8+ 출시와 애플용 AMOLED 패널 양산 시작, 소니, 도시바, 파나소닉 등 일본 업체들의 OLED TV 시장 진입으로 2사분기 이후에도 AMOLED 시장은 성장세를 이어갈 것으로 보인다. Mobile용 AMOLED는 매 분기 1억대 이상이 출하될 것으로 보이며, TV용 AMOLED도 매 분기 30만대 이상의 출하량을 보일 것으로 전망된다.

유비산업리서치는 전체 AMOLED시장이 2020년까지 연평균 33%로 성장하여 약 593억 달러 규모가 될 것으로 예상했다.

<전체 AMOLED 시장 매출액 전망>

JOLED, 세계 최초 잉크젯 프린팅 방식으로 21.6 inch OLED 생산

JOLED

JOLED는 RGB 잉크젯 프린팅 방식으로는 세계 최초로 21.6 inch 4K OLED 패널을 개발하고, 해당 시제품을 4월부터 출하했다고 지난 17일 밝혔다.

JOLED가 RGB 잉크젯 프린팅 방식으로 개발한 패널의 두께는 1.3mm이며, 무게 500g, 밝기 350cd/m2, 명암비는 1,000,000:1 수준이다. JOLED에 따르면 이 패널은 의료용 모니터에 적용됐다.

<JOLED가 개발한 21.6 inch OLED와 세부 스펙, 출처: JOLED>

 

JOLED는 ‘잉크젯 프린팅은 발광재료를 인쇄(도포)하여 형성하는 기술로써 생산공정이 단순하고 다양한 화면 크기로 확장이 용이하기 때문에 실용화에 앞장섰다’며, ‘OLED 패널의 광 추출 효율(top emission)과 시야각, 색 재현성을 향상 시킬 예정이다’고 말했다.

또한, JOLED는 ‘잉크젯 프린팅 방식의 중소형 OLED의 적용분야(게임용 모니터, 자동차 탑재 용도 등) 또는 공급처를 지속적을 확대할 것’이라며 앞으로의 계획을 밝혔다.

JOLED는 일본 민관 펀드인 산업혁신기구(INCJ)와 JDI, Sony, Panasonic 4개사가 설립한 회사로 잉크젯 프린팅 방식에 대해 적극적으로 개발하고 있으며, 패널 업체 중 유일하게 2016년 잉크젯 프린팅 방식으로 개발된 제품을 공개한 바 있다.

 

<JOLED가 2016년에 공개한 55inch 4K flexible AMOLED panel>

 

유비리서치의 ‘Solution process OLED 시장 진입가능성 분석 보고서’에 따르면 잉크젯 프린팅은 solution process의 공정 방법 중 하나로 ink-jet head를 이용하여 pixel 각각에 잉크를 떨어뜨리는 방식이다. 주요 패널 업체에서는 이러한 공정 방법으로 solution process를 개발하고 있어, 향후 JOLED의 행보에 귀추가 주목된다.

Solution process는 Gen8이상 원장에서 RGB pixel 구조의 대면적 OLED panel 구현이 가능하고, 재료사용효율이 높고 단순한 layer로 개발되고 있어 양산 성공 시 원가절감이 가능한 장점이 있다.

한편, 유비리서치의 이충훈 대표는 ‘대면적 OLED 시장은 WRGB 방식으로 프리미엄시장 공략의 전략을 펼치고 있지만, 추후 LCD를 OLED로 대체하기 위해서는 저비용/고생산 기술이 핵심이기 때문에 solution process가 OLED의 핵심 기술이 될 것’이라 말한 바 있다.

[SID 2017] 삼성디스플레이, 세계 최초 9.1inch Stretchable AMOLED 공개

삼성디스플레이  삼성디스플레이 삼성디스플레이

삼성디스플레이가 세계 최초로 터치를 포함한 9.1inch stretchable AMOLED를 SID 2017에서 공개하여 세계 최고의 AMOLED 기술력을 자랑하였다.

삼성디스플레이는 SID 2017 symposium에서 “9.1-in stretchable AMOLED display based on LTPS technology”라는 제목의 논문 발표와 더불어 삼성디스플레이의 전시장 부스에도 future display존에 실물을 전시하며 관람객들의 큰 관심을 모았다.

이번에 전시된 9.1 inch stretchable AMOLED는 수축이 가능한 film 기판위에 PI를 형성한 후 stretchable이 가능한 영역을 패터닝 하였다. 그리고 패터닝 된 PI위에 TFT와 OLED를 형성하는 구조로 제작되었으며, multi-touch sensor를 동시에 구현하였다.

 

<Samsung Display의 9.1inch stretchable AMOLED 구조>

또한 stretchable AMOLED는 convex와 concave 형태 모두 구현 가능하며, concave형태에서는 최대 12mm까지 늘어난다.

Stretchable display는 flexible display의 최종기술로서 형태에 제약을 전혀 받지 않기 때문에 의류나 인간의 피부 등 다양한 분야에 적용되어 기존과는 새로운 영역의 application을 창출해 낼 것으로 기대되고 있다.

이번 전시는 flexible AMOLED로 모바일 기기용 AMOLED 시장을 선도하고 있는 삼성디스플레이가 다시한번 후발주자와의 기술격차를 확고히 유지하는 계기가 될 것으로 예상되며, 빠른 속도로 AMOLED 기술을 추격중인 후발 업체들에게 어떠한 자극을 줄지 기대된다.

 

<Samsung Display의 9.1inch stretchable AMOLED이 전시된 부스 전경>

<Samsung Display의 9.1inch stretchable AMOLED 스펙>

<Samsung Display가 전시한 9.1inch stretchable AMOLED, 출처: 삼성디스플레이>

[SID 2017] 프리미엄 TV 시장, LCD vs OLED 전쟁 재점화

2017년 프리미엄 TV 시장은 LG전자의 OLED TV 판매량 증가와 Sony의 OLED TV 시장 가세로 OLED가 초반 기선을 잡는 모양세 였다. 하지만 대표적인 LCD 제조업체인 대만의 AUO에서 프리미엄 TV 시장에서 LCD가 OLED보다 프리미엄 TV 시장에서 유리하다 라는 발표로 다시한번 OLED TV와 LCD TV간의 시장 점유 경쟁이 치열해질 전망이다.

5월 22일부터 미국 LA에서 개최중인 SID 2017의 키노트 세션에서 AUO의 CEO인 Paul Peng는 “The warring states era of display technologies”라는 주제로 프리미엄 TV 시장에서 LCD가 OLED보다 지속적으로 더 우세할 것이다 라는 내용을 발표했다.

Paul Peng는 LCD가 더 우세하다며 내세운 주장은 크게 3가지이다.

첫째는 성능으로 LCD가 maximum size와 peak brightness, ambient contrast ratio, color gamut, image sticking, lifetime 면에서 모두 OLED보다 우세하다고 밝혔다.

둘째는 cost로, 2016년 black friday에서 65inch HDR 4K 기준 narrow bezel LCD TV는 US$ 1,099였지만 OLED는 2배이상 높은 US$ 2,800 이라는 점을 들었다.

마지막으로는 eco friendly이다. 제조공정에서 사용되는 공업용수가 LCD 보다 OLED 제조에 더 많이 사용된다는 점과 OLED의 소비전력이 LCD의 약 2배가량 높다는 점, 교체주기가 OLED는 2~4년이지만 LCD는 5년에서 8년으로 2배가량 높아 LCD가 OLED보다 친환경적인 제품이라는 것을 강조했다.

OLED TV가 출시된 이후 LCD와 OLED 진영 간의 치열한 다툼이 있었으나 프리미엄 모바일 시장에서는 OLED의 점유율이 지속적으로 높아지고 있으며 프리미엄 TV 시장에서도 LCD보다 한발 앞서 나가는 분위기였다. 하지만 SID 2017이라는 세계 최대의 디스플레이 학회의 키노트에서 AUO의 이와 같은 발표로 디스플레이 업계에서 OLED와 LCD 진영 간의 치열한 전쟁이 더욱 심화될 것으로 예상된다.

 

LG Display, Will Unveil Its Next-generation Displays at’ SID 2017’

SID 2017

LG Display will unveil future displays at ‘SID 2017’ to be held at Los Angeles Convention Center, USA from May 23 to 26. LG Display will prepare its own booth under the theme of “Our Technology, Your Innovation” and showcase its unique displays at three Zones of OLED TV, IT & Mobile, and Automotive.

First of all, LG will display its paper-like ultrathin 77-inch UHD Wallpaper TV. Due to OLED Technology, this TV has an excellent resolution and is so thin and light that it can be tightly attached to the wall, thereby maximizing the design effect. LG’s 65-inch UHD Wallpaper TV panel which will be unveiled was selected as ‘the Best Display of This Year’ for its highest technology at the SID.

<LG Display’s 65” UHD Resolution CSO(Crystal Sound OLED), Source : LG Display>

 

In addition, LG Display will showcase its 65-inch UHDCSO(Crystal Sound OLED) with a new function of display producing sound and 55-inch FHD transparent display making natural and transparent screen, which can show at a glance future displays that are being developed by LG Display.

LG Display applies in-TOUCH technology with a touch sensor embedded in panel to 24-inch monitor as well, while providing differentiated values to the IT market through its large and high-resolution displays. in-TOUCH technology doesn’t need Touch Cover Glass, so it features not only a light and excellent touch function but also a more sophisticated design by reducing the thickness of panels and bezel.

LG Display will also unveil state-of-the-art IT products such as the world’s largest 37.5-inch 21:9 curved monitor that maximizes immersion and 31.5-inch 8K monitor with high-resolution like reality.

<LG Display’s 12.3-inch automotive front display (Down), Transparent(Up), Source : LG Display>

 

LG Display suggests the future of automobiles, with its sophisticated design and excellent resolution in the rapidly growing automotive display field. By featuring multi-layers of 12.3-inch front display and transparent display, LG’s automotive display provides a sense of three-dimensions similar to existing analog Cluster. Also, LG Display will prepare a display booth for visitors to experience various displays in car such as mirror display that can replace Room Mirror due to its high reflectivity of more than 75%.

LG Display’s CTO(Chief Technology Officer), Kang, In Byeong said, “LG Display has made the world’s first display’ including IPS and OLED TV, and “LG Display will lead the next-generation display market with its continued technology development”.

Samsung Display, shows advanced product such as stretchable display in SID 2017

Samsung Display participates in ‘SID 2017’ exhibition hosted by the world-renowned Society for Display Experts ‘SID (The Society for Information Display)’ to show advanced future display products.

Samsung Display will exhibit advanced display products that have never been revealed before, such as a stretchable display and a non-eyewear 3D OLED at the LA Convention Center in Los Angeles on 23rd (local time).

Samsung Display participates in this SID 2017, and is showing the unrivaled display technology leadership and confidence by showing high-tech products and publishing outstanding papers.

Samsung Display unveiled a 9.1 inch stretchable OLED product with stretching screen.  The stretchable display is the next generation display technology that extends the screen flexibly, and it is considered to be the most suitable technology for wearable, Internet (IoT), AI (AI), and car display.

<source : Samsung Display>

 

Compared to the existing flexible OLEDs that can be deformed in only one direction, such as bending, folding, or rolling a screen, a stretchable OLED can be deformed in more than two directions.  This is a much higher level of implementation difficulty and is often referred to as the end point of flexible display technology in the industry.

The product displayed this time, when the screen is pressed from above, the screen is dented like a rubber balloon, and then returns to its original flat shape.  On the contrary, when pressed from below, the screen stretched up and had the elasticity to recover.  Samsung Display has developed a high level of stretchable technology that maintains the original picture quality while increasing the screen to a depth of up to 12mm when the display is pressed through steady research and development.

In addition, Samsung Display will exhibit ‘non-eyewear 3D OLED’ products. This 5.09-inch product realizes a real-life image that looks a bit different depending on the viewer’s position on the display, and expresses a more realistic 3-D image.

Especially, due to the contrast ratio close to infinity of OLED, it shows more natural stereoscopic image than LCD product. This technology is expected to be utilized in various fields requiring 3D image technology such as 3D pop-up book, 3D game, VR and etc.

 

On the other hand, this exhibition will have booths that enable users to experience the OLED technologies of Samsung Display. Including 3.5-inch size, 858ppi optimized for VR devices, 120Hz for wearable and tablet OLED products for smooth picture quality are exhibited.

In addition, much improved image quality of OLED, HDR (High Dynamic Range) and low power consumption technology can be confirmed.  Samsung Display also offers a ‘Design Innovation’ corner that introduces the development of smartphone display design, a unique flexible OLED technology.

From round OLEDs applied to mobile phones for the first time in the world after the successful production of flexible OLEDs in 2013, to recent full-screen OLEDs with the highest picture quality rating of ‘Excellent A +’ from DisplayMate, an image quality evaluation agency, it is able to show the flexible OLED technology accumulated by Samsung Display at a glance.

In addition, a high-resolution 65-type frameless LCD curved TV that minimizes screen reflections by applying ultra-low reflection POL (polarizer) and achieves 100% color expression power (DCI-P3 standard), 34-inch QHD + (3440X1440) LCD curved monitor with 21: 9 aspect ratio maximizes information transfer efficiency and 27-inch FHD (1920X1080) LCD curved monitor capable of 144 Hz high-speed screen operation are exhibited as a product that embodies innovative technology

Meanwhile, a paper entitled “Extendable Screen with Stretchable OLED Display” of Hong Jong-ho, researcher of Samsung Display Research Institute selected as SID 2017 Distinguished Paper.

LG디스플레이, ‘SID 2017’에서 차세대 디스플레이 대거 공개

LG디스플레이 LG디스플레이 LG디스플레이 LG디스플레이

LG디스플레이가 5월 23일부터 26일까지 미국 로스앤젤레스 컨벤션센터(Los Angeles Convention Center)에서 진행되는 ‘SID 2017’ 전시회에 참가해 미래 디스플레이 제품들을 대거 선보인다. “Our Technology, Your Innovation”라는 주제로 별도의 부스를 마련하고 OLED TV, IT & Mobile, Automotive 등 3가지 Zone에서 LG디스플레이만의 차별화된 제품들을 전시한다.

먼저 종이처럼 얇은 혁신적인 디자인의 77인치 UHD Wallpaper TV를 선보인다. OLED 기술로 뛰어난 화질을 구현할 뿐 아니라 얇고 가벼워 벽에 완전히 밀착시킬 수 있어 디자인 효과도 극대화했다. 함께 선보이는 65인치 UHD Wallpaper TV 패널은 이번 SID에서 최고의 기술력을 가진 제품으로 인정받아 ‘올해의 디스플레이’로 선정된 바 있다.

<LG디스플레이의 65인치 UHD 해상도의 CSO(Crystal Sound OLED), 출처 : LG디스플레이 >

 

또한, 패널 자체에서 소리가 나올 수 있게 해 디스플레이의 새로운 기능을 제시한 65인치 UHD CSO(Crystal Sound OLED)와 자연스럽고 투명한 화면을 구현하는 55인치 FHD 투명 디스플레이도 선보여 LG디스플레이가 개발하고 있는 미래 디스플레이를 한 눈에 볼 수 있다.

LG디스플레이는 터치 센서를 패널에 내재화한 in-TOUCH 기술을 24인치급 모니터까지 확대 적용하는 한편, 대형 및 고해상도 제품으로 IT시장에서도 차별화된 가치를 제공한다. in-TOUCH 기술은 터치 커버 글라스(Touch Cover Glass)가 필요 없기 때문에, 얇고 가벼우면서 뛰어난 터치 성능을 구현할 뿐만 아니라 패널과 베젤의 두께를 줄여 더욱 세련된 디자인을 완성시킬 수 있다.
몰입감을 극대화한 세계 최대 사이즈의 37.5인치 21:9 곡면 모니터와 실제와 같은 고화질을 구현하는 31.5인치 8K 모니터 등 최첨단 IT제품도 선보인다.

<LG디스플레이의 12.3인치 자동차용 전면(아래), 투명(위) , 출처 : LG디스플레이 >

 

LG디스플레이는 급속히 성장하고 있는 자동차용 디스플레이 분야에서도 세련된 디자인과 뛰어난 화질의 OLED로 자동차의 미래를 제안한다. 12.3인치 전면 디스플레이와 투명 디스플레이를 다중 레이어로 구현함으로써 기존 아날로그 계기판(Cluster)과 유사한 입체감을 제공하는 디스플레이를 선보인다. 또한, 75%가 넘는 고반사율로 룸미러(Room Mirror)를 대체할 미러 디스플레이 등 다양한 디스플레이를 실제 자동차에서 사용하듯 경험할 수 있는 전시 공간을 준비했다.

LG디스플레이 CTO(최고기술책임자) 강인병 전무는 “LG디스플레이는 IPS, OLED TV 등 ‘세계 최초’의 디스플레이 역사를 써왔다”며 “앞으로도 지속적인 기술 개발로 차세대 디스플레이 시장을 선도해 나갈 것”이라고 밝혔다.

 

삼성디스플레이, ‘SID 2017’에서 화면 늘어나는 디스플레이 등 첨단 제품 공개

삼성디스플레이

삼성디스플레이가 세계적 권위의 디스플레이 전문 학회 ‘SID(The Society for Information Display)’가 주최하는 ‘SID 2017’ 전시회에 참가해 최첨단 미래 디스플레이 제품들을 선보인다.

삼성디스플레이는 23일(현지시간) 미국 LA 컨벤션 센터에서 개막하는 이번 전시회에서 화면이 늘어나는(stretchable) 디스플레이를 비롯해 무안경 3D OLED 등 이제껏 공개한 적 없었던 첨단 미래 디스플레이 제품들을 전시한다.

삼성디스플레이는 이번 SID 2017에 참가하며 첨단 제품 공개 및 우수한 논문 발표를 통해 독보적인 디스플레이 기술 리더십과 자신감을 과시한다는 전략이다.

삼성디스플레이는 화면이 늘어나는 9.1형 스트레처블(stretchable) OLED 제품을 공개했다. 스트레처블 디스플레이는 화면이 탄력적으로 늘어나는 차세대 디스플레이 기술로 웨어러블, 사물인터넷(IoT), 인공지능(AI), 차량용 디스플레이에 가장 적합한 미래 기술로 꼽힌다.

<출처 : 삼성디스플레이>

 

기존의 플렉시블 OLED가 화면을 구부리거나 접거나 두루마리처럼 감는 등 한 방향만으로만 변형이 가능한 것에 비해, 스트레처블 OLED는 두 방향 이상으로의 변형이 가능한 점이 특징이다.  구현 난이도가 훨씬 높은 기술로, 업계에서는 플렉시블 디스플레이 기술의 종착점으로 불린다.

이번에 전시된 제품은 화면을 위에서 누르면, 고무풍선을 누른 것처럼 화면이 움푹 들어갔다가 다시 제자리를 찾아가며 본래의 평평한 형태로 돌아온다.

반대로 아래에서 눌러도 화면이 위로 늘어났다 회복하는 신축성을 가졌다.

삼성디스플레이는 꾸준한 연구개발을 통해 디스플레이를 눌렀을 때 최대 12mm의 깊이로 화면이 늘어나면서도 기존의 화질은 그대로 유지하는 높은 수준의 스트레처블 기술을 세계 최초로 구현했다. 또한, 삼성디스플레이는 입체 영상 관련 미래 기술인 ‘무안경 3D OLED’ 제품을 전시한다. 5.09형 크기의 이 제품은 보는 사람의 위치에 따라 조금씩 다르게 보이는 실물의 모습을 디스플레이에서 구현해, 보다 현실감 있는 3차원 영상을 표현한다.

특히 OLED의 무한대에 가까운 명암비 특성 덕분에 LCD 제품보다 더욱 자연스러운 입체 영상을 보여준다. 이 기술은 앞으로 3D팝업북, 3D게임, VR 등 3차원 영상기술이 필요한 다양한 분야에 활용할 수 있을 것으로 기대된다.

한편, 이번 전시에는 삼성디스플레이의 앞선 OLED 기술을 비교 체험할 수 있는 부스가 설치된다.  3.5형 크기에 858ppi로 VR 기기에 최적화된 제품을 비롯해 부드러운 화질을 위해 120Hz로 구동하는 제품과 웨어러블, 태블릿용 OLED 제품들이 전시된다.  또한 더욱 향상된 OLED의 화질과 HDR(High Dynamic Range), 저소비전력 기술 등 도 함께 확인 할 수 있다.
삼성디스플레이는 독보적인 플렉시블 OLED 기술이 스마트폰 디스플레이 디자인의 발전을 이끈 점을 소개한 ‘디자인 혁신’ 코너도 마련한다.

2013년 세계 최초로 플렉시블 OLED 양산에 성공한 후 처음 휴대폰에 적용된 라운드형 OLED부터, 최근 화질 평가기관인 디스플레이메이트로부터 ‘엑설런트 A+’의 최고 화질 등급을 획득한 풀스크린 OLED까지, 그동안 삼성디스플레이가 쌓아온 플렉시블 OLED 기술력을 한 눈에 볼 수 있도록 했다.
또한, 초저반사 POL(편광판)을 적용해 화면 반사를 최소화하고 색표현력 100%(DCI-P3 기준)를 달성한 고화질 65형 프레임리스(Frameless) LCD 커브드 TV를 비롯해, 정보 전달 효율을 극대화 한 화면비율 21:9의 34형 QHD+(3440X1440) LCD 커브드 모니터와 144Hz 고속 화면 구동이 가능한 27형 FHD(1920X1080) LCD 커브드 모니터도 혁신 기술을 구현한 제품으로 함께 전시된다.
한편 이번 학회에서 홍종호 삼성디스플레이 연구원의 ‘화면이 늘어나는 스트레처블 OLED 디스플레이’논문이 SID 2017 우수 논문(Distinguished Paper)으로 선정됐다.

TADF 원조 Adachi 선생을 만나다

2010년 Nature에 TADF(Thermally Activated Delayed Fluorescence) 논문을 최초로 개제한 Kyushu 대학의 Adachi 연구소를 방문했다. Adachi교수의 인상은 대학교수 보다는 대학원생 같은 수더분한 이미지다.

<Prof. Adachi , 출처 : OLEDNET>

 

Adachi 교수가 TADF 재료에 대해 열정을 가지고 있는 이유는 OLED 패널 제조 가격을 낮출 수 있는 최선의 재료라고 확신하고 있기 때문이다. 현재 사용중인 발광재료는 형광재료인 1세대 재료와 인광재료인 2세대 재료가 있다. 1세대 형광재료는 가격은 싸나 효율이 낮은 단점이 있으며, 2세대 인광재료는 효율은 높으나 가격이 비싼 단점이 있다. 희토류인 이리듐을 사용하기 때문이다. Adachi 교수가 주도하고 있는 3세대 발광재료 TADF는 1세대 재료의 구조로서 2세대 재료의 효율을 달성할 수 있는 장점을 보유하고 있다.

TADF 재료는 이론적으로 100% 내부 효율을 달성할 수 있으며 분자 설계가 매우 자유로운 특징이 있다. 즉 봉 형태의 분자 설계가 가능하여 배향성이 있는 재료를 만들 수 있어 외부 광효율을 40%까지 올릴 수 있다.

Adachi 교수는 TADF 재료 상용화 시점에 대해서는 갤럭시용 OLED 재료로서는 아직 특성이 미흡하지만 스펙이 다소 낮은 용도에는 내년부터 적용이 가능할 것이라고 언급했다. 특히 녹색이나 적색 도판트가 사용가능해 질 것으로 예상했다. 하지만 디스플레이에 사용되기 위한 궁극적인 TADF가 되기 위해서는 T1과 S1 밴드갭을 줄여 전자 전이 속도를 올리는 것이 필수적이라고 강조했다. 전자 전이 속도가 현재는 1μsec 정도이나 10-1 ~ 10-2 μsec까지 빨라지면 분자 열화가 줄어들어 수명도 확보된다고 언급했다. 또한 아직 TADF 도판트 효율을 충분히 발휘할 수 있는 전용 호스트 재료가 없는 것은 TADF 재료 개발에 지장이 되고 있어 발광재료 업체들의 적극적인 참여가 필요하다고 피력했다.

Adachi 교수는 최근 독일 저널인 Angewandte에 색좌표가 (0.148, 0.098)이며 외부 광효율이 19.2% 이상인 deep blue TADF 논문을 실었다.

Meet Prof. Adachi, the initiator of ‘Thermally Activated Delayed Fluorescence’

We visited Adachi’s laboratory at Kyushu university that published the TADF (abbr., Thermally Activated Delayed Fluorescence) thesis firstly to ‘Nature’ in 2010. He looked like a naive graduate student rather than a professor.

<Prof. Adachi , source : OLEDNET>

 

The reason that Prof. Adachi’s showing a full of enthusiasm for the TADF materials is that he convinces it is the best materials to lower manufacturing costs of OLED panel. Luminescence materials used in present are divided like fluorescence materials as 1st generation, and phosphorescence materials as 2nd generation. Fluorescence materials as 1st generation have a cost-effective and a low-efficiency, whereas phosphorescence materials as 2nd generation have both high-efficiency and also high-costs. This is because it utilizes the rare-earth metal, iridium. TADF as 3rd generation which Prof. Adachi has been driving, is as a structure of 1st generation materials and it has the merit of achieving the efficiency of 2nd generation materials.

TADF materials have special features that are theoretically capable of reaching 100% inter-efficiency and being free to plan molecular. It means that TADF can raise external light-efficiency up to 40%, because it is possible to form oriented materials by rod-shaped molecular planning.

About the question of the timing of commercialization of TADF materials, Prof. Adachi said that it is still insufficient to apply to OLED of Galaxy, while it’ll be possible to utilize it for products with somehow low specification from next year. It is especially expected that green or red dopant may be available. However, he also emphasized that it is essential to increase the electron transfer speed by reducing the band gap of T1 and S1 in order to be the ultimate TADF for use in displays. The electron transfer speed is currently around 1μsec, but if its speed goes up to 10-1 ~ 10-2 μsec, the lifetime would be secured due to reducing molecular degradation. He expressed about that it is necessary to actively attend by manufacturers of luminescence materials, because there are no dedicated host materials that can sufficiently demonstrate the efficiency of TADF dopant due to difficulties in developing TADF materials.

 

 

He recently put a thesis, deep blue TADF with a color coordinate of (0.148, 0.098) and external light-efficiency of more than 19.2% at German journal Angewandte.

Chinese panel makers BOE and Tianma started small and medium sized AMOLED production, acceleratedly chasing Samsung.

BOE

It is the first time for China to produce Gen6 flexible AMOLED; it is expected that BOE’s mass production not significantly affected by yield due to the tremendous support from the Chinese government will cause such impact on the small and medium-sized AMOLED market where Samsung has monopolized so far.

B7 line, which was built in May 2015 with the investment of approx. 465 yuan, is expectedly used in high-end mobile display in China, with 48K- large monthly capacity based on Gen6. In Dec last year, 45K investment was confirmed in Mianyang’s Gen6 flexible AMOLED production line B11 and mass production is expected to operate in 2019.

 

<5.5 inch FHDfoldable AMOLED launched at CIDC 2016>

 

In addition, Tianma successfully lighted up the rigid AMOLED panel manufactured in Gen6 LTPS AMOLED production line in Wuhan for the first time in China on April 20th. Tianma has first built the Gen 4.5 AMOLED pilot line in China as well as Gen 5.5 AMOLED production line in Shanghai for mass producing small-medium AMOLED display.

Also CSOT aims to mass-produce in the fourth quarter of 2018 as the investment in Gen6 rigid and flexible AMOLED production lines at Wuhan’s T4 plant has been proceeding. Visionox plans to additionally expand Kunshan’s Gen5.5 line (V1, presently 4K) phase1 11K and Phase2 15K investment is being proceeded. ROYOLE also invested in the Gen 5.5 flexible AMOLED mass production line, and LOI of the SFA deposition equipment was announced last January. The expected capacity is 15K.

In the Korea-dominated AMOLED market, Chinese panel makers are taking up the market share rapidly through the Chinese government support and their huge domestic market. Lee Choong-hoon (chief analyst) at UBI Research specialized in AMOLED market predicts that by 2021, Chinese AMOLED panel makers will record their second largest shipment volume with approx. 16% of the entire market share via full-fledged shipment from 2018, followed by Korea by 2021 “.

 

<forecast of AMOLED panel shipment by country>

 

삼성 겨냥한 추격전 가속, BOE와 Tianma 등 중국 패널 업체 중소형 AMOLED 생산 시작

BOE BOE BOE BOE

중국 BOE는 5월 15일 Chengdu에 위치한 Gen6 flexible AMOLED 생산 라인인 B7에서 대량 생산을 시작했다고 공식 발표했다. 중국에서 Gen6 flexible AMOLED를 생산하는 것은 이번이 처음으로, 중국 정부의 대규모 지원을 통해 수율에 크게 얽매이지 않는 BOE의 양산 특성 상 삼성이 독점하고 있던 중소형 AMOLED 시장에 큰 파장을 불러 일으킬 것으로 전망되고 있다.

약 465위안이 투입되어 지난 2015년 5월에 착공 된 B7은 Gen6 기준으로 월 48K의 Capa.를 갖추고 있으며 자국 내 하이엔드급 모바일 디스플레이에 주로 사용 될 것으로 기대를 모으고 있다. 또한, 지난 2016년 12월 Mianyang의 Gen6 flexible AMOLED 생산 라인 B11에도 45K 투자가 확정되었으며 대량 생산은 2019년으로 예상되고 있다.

 

<CIDC 2016에서 공개한 5.5 inch FHD foldable AMOLED>

 

이 밖에 Tianma는 지난 4월 20일 중국 최초로 Wuhan에 위치한 Gen6 LTPS AMOLED 생산 라인에서 제작된 rigid AMOLED 패널 점등에 성공하였다. Tianma는 중국 최초로 Gen 4.5 AMOLED 파일럿 라인을 구축하였으며, Shanghai에 Gen 5.5 AMOLED 생산라인을 구축하여 small-medium 사이즈의 AMOLED 디스플레이를 양산 중에 있다.

또한, CSOT는 Wuhan의 T4공장에 Gen6 rigid와 flexible AMOLED 생산 라인의 투자가 진행 되어 2018년 4사분기 양산을 목표로 하고 있으며, Visionox는 Kunshan의 Gen5.5 line(V1, 현재 4K) phase1 11K 추가증설과 phase2 15K 투자가 진행되었다. Royole도 Gen 5.5 flexible AMOLED 양산라인 투자를 진행 하였으며, SFA 증착기의 구매의향서(LOI)가 지난 1월에 공시되었다. 예상 Capa.는 15K 이다.

이처럼 한국 업체들이 주도하고 있는 AMOLED 시장에서 중국 패널 업체들은 정부의 보조금 지원과 거대한 내수 시장을 통해 빠른 속도로 시장 점유율을 차지할 것으로 예상 된다. AMOLED 시장조사업체인 유비리서치의 이충훈 대표(수석 애널리스트)는 중국의 AMOLED 패널 업체들이 2018년부터 본격적인 출하량 증가를 통해 2021년에는 전체시장의 약 16%로 한국에 이어 두번째로 많은 출하량을 기록할 것으로 전망했다.

 

<국가별 시장 AMOLED 패널 출하량 전망, 출처 : UBI research>

삼성•LG디스플레이의 OLED, 올해의 디스플레이로 선정

삼성 디스플레이와 LG 디스플레이는 세계 최대 디스플레이 학회인 정보디스플레이학회(SID)에서 OLED로 각각의 기술력을 인정받았다고 18일 밝혔다.

 

두 회사에 따르면 SID가 시상하는 ‘올해의 디스플레이 산업상(DIA, Display Industry Awards)’에는 삼성디스플레이의 quad-edge flexible OLED가, 올해의 디스플레이(Display of the Year)에는 LG 디스플레이의 65inch UHD Wallpaper OLED TV 패널이 선정됐다.

 

SID는 전년도 출시된 제품 중 글로벌 디스플레이 산업의 미래를 밝히는 전도유망한 혁신적인 디스플레이 제품과 부품, 응용제품에 이 상을 수여한다.

 

<삼성디스플레이의 quad-edge flexible OLED, 출처: 삼성디스플레이>

 

SID에 따르면, Galaxy S7 Edge에 탑재된 삼성디스플레이의 quad-edge flexible OLED는 업계 최초로 디스플레이의 상하좌우 모든 면을 커브드 형태로 구현함으로써 탁월한 기술력을 선보여 올해의 디스플레이 산업상을 수상했다.

이 제품은 BM(블랙 매트릭스)영역 최소화 설계기술을 통해 이전 제품대비 베젤을 0.2mm 더 줄이고, 상하 끝부분(곡률반경 25R)을 미세하게 변화시켜 완만한 곡선모양을 구현했다. 또한, 심미성과 편안한 그립감을 위해 패널의 좌우 엣지 부분을 4단계(곡률반경 35R→9.4R→5.4R→3.8R)의 다른 곡률을 적용하였다.

 

이번 수상에 대해 전석진 삼성디스플레이 마케팅 팀장(상무)은 ‘삼성디스플레이는 첨단 플렉시블 OLED 기술을 통해 시장에서 차별화된 제품을 선보여 왔다”며, “쿼드엣지 플렉시블 OLED를 통해 디스플레이 시장을 지속적으로 선도하게 돼 기쁘다’고 말했다.

 

<LG디스플레이의 65inch UHD Wallpaper OLED 패널, 출처: LG디스플레이>

 

한편, 올해의 디스플레이로 꼽힌 LG디스플레이의 65inch UHD Wallpaper OLED 패널은 OLED 기술을 내세워 뛰어난 화질을 구현할 뿐 아니라 응용 범위와 디자인 측면에서도 디스플레이의 새로운 가능성을 제시한 혁신적인 제품이란 평가를 받았다.

 

이 패널이 적용된 OLED TV는 지난 CES 2017뿐만 아니라 엔가젯, 시넷 등 전 세계 유력 매체들로부터 이미 다수의 상을 수상하였으며, 지난 16일 미국 소비자 전문 매체인 컨슈머리포트로부터 역대 최고점인 89점(TV평가 부분)을 받은 바 있다.

 

65inch UHD Wallpaper OLED TV에 적용된 OLED패널은 두께가 1mm가 채 안되며, TV세트로 제작 시에도 두께가 3.55mm에 무게도 7.4kg에 불과해 액자처럼 벽에 완전히 밀착시킬 수 있다. 또한, 디자인 효과를 극대화 함으로써 TV시청 시 몰입감을 높여준다.

 

LG디스플레이 연구소장 윤수영 상무는 “LG디스플레이는 차별화된 제품 및 기술과 핵심 역량을 혁신해 나가며 고객과 소비자들에게 새로운 가치를 제공해왔다” 며 “앞으로도 세계 디스플레이 산업을 대표하는 회사로서 차세대 기술 선도에 최선을 다하며 위상을 이어 나갈 것”이라고 밝혔다.

 

OLED of Samsung•LG Display, Selected as the Display of the year

Samsung Display and LG Display announced on the 18th that their technology were recognized as OLED respectively in the Society for Information Display (SID), the world’s largest Display society.

 

According to the two companies, in SID awards, Samsung Display’s quad-edge flexible OLED is selected for ‘DIA, Display Industry Awards’ and LG Display’s 65inch UHD Wallpaper OLED TV panel is selected for ‘Display of the Year’

 

SID awards the prize to promising innovative display products, components, and applications that unveil the future of the global display industry among the products launched last year.

 

<Samsung Display’s quad-edge flexible OLED, source: Samsung Display>

 

According to SID, Samsung Display’s quad-edge flexible OLED in Galaxy S7 Edge was the first in the industry to display the top, bottom, left, and right sides of the display in a curved shape, and won the Display Industry Awards for its outstanding technology.

 

This product uses a BM (black matrix) area minimization design technology to further reduce the bezel by 0.2mm, the upper and lower end portions (curvature radius 25R) were finely changed to realize a gentle curved shape. In addition, for the aesthetics and comfortable grip, the left and right edge portions of the panel were subjected to four different curvatures (curvature radius 35R → 9.4R → 5.4R → 3.8R).

For this award, Jeon, Seok-jin, marketing director of Samsung Display mentioned “Samsung Display has introduced differentiated products in the market through the state-of-the-art flexible OLED technology,” and said “We are pleased to continue to lead the display market with quad-edge flexible OLEDs.”

 

<LG Display’s 65inch UHD Wallpaper OLED panel, source: LG Display>

 

On the other hand, LG Display’s 65-inch UHD Wallpaper OLED panel, which was selected as the display of the year, was evaluated as an innovative product that not only realizes excellent image quality by adopting OLED technology but also presents new potential of display in terms of application range and design.

 

The OLED TV with this panel has already won numerous awards from the world’s leading media such as ENGAGET and SINET as well as CES 2017, On the 16th, it received 89 points (TV evaluation part) which is the highest point from the consumer report, American consumer media.

 

OLED panel applied to 65inch UHD Wallpaper OLED TV is less than 1mm thick and when it is made in TV set, thickness is less than 3.55mm and weighs only 7.4kg so that it can be brought into close contact with the wall like a frame. In addition, maximizing the design effect increases the immersion feeling when watching TV.

 

Yoon, Soo-Young, managing director of LG Display Research mentioned “LG Display has been innovating differentiated products, technologies and core competencies and providing new value to customers and consumers,” and said “As a company representing the global display industry, we will continue to do our best to lead the next generation of technology.”

2017, Will be the Year of OLED TV?

On 16th, Consumer Reports, an American consumer magazine rated LG Signature TV W 89 scores in the TV quality category. It was an all-time high, overtaking LG OLED TV(OLED65C7P) that ranked number 1 with 88 scores in the ‘4K TV(Best 4K TVs to Buy Right Now)’ category in April.

LG Signature TV W features not only the thinnest display(4mm including a wall-mounted TV stand) by applying OLED panel and specially-designed finishing materials, but also the greatest immersion by eliminating unnecessary factors. Due to that reason, LG Signature TV W won ‘Best of the Best’ and ‘Best TV Product’ awards at CES 2017 and was once acclaimed as ‘a beautiful TV like a work of art’ from Engadget.

 

<LG Signature TV W, Source : mybroadband>

 

Meanwhile, LG Ultra OLED TV and Sony OLED TV came in second. Among the 11 TV models from top 1 to 10 selected from Consumer Reports, 10 out of 11 were OLED panel-based TVs, whereas a LCD-based TV was only Sony’s BRAVIA.

OLED TV is receiving lots of attention of consumers due to its great picture. In last March, Director Yoon Soo-young of LG Display said at the 3rd OLED Korea Conference hosted by UBI Research that “OLED TV on display has been moved from the corner to the center of the Best Buy LG store”, and OLED TV is becoming the mainstream of the premium TV market. Accordingly, many second movers are joining the trend of OLED TV and have released OLED TVs or announced a plan to release.

Toshiba launched 55 and 65-inch OLED TV Regza last march, and German luxury AV brand Loewe lunched its new flagship Bild 9 series, 55 and 65-inch 4K OLED TV on May 1, beginning to release OLED TVs in the premium TV market in earnest.

In addition, Sony, which attracted big attention for its OLED TV unveiled for the first time at CES 2017, officially announced on May 8th that they will firstly sell 55 and 65-inch sizes of 4K BRAVIA OLED TV A1E series. Panasonic also announced on May 14th that they will firstly sell EZ900, 950, and 1000 among 4K OLED TV in Japan from June.

 

<Sony’s 4K BRAVIA OLED TV A1E,  Source : Sony blog>

 

Meanwhile, Choong Hoon Yi, president of UBI Research(senior analyst) analyzed at the Topic seminar in April that Sony’s OLED TV is expected to sell about 400,000 in 2017. Accordingly, he expected Sony’s OLED TV will have about 27% market share in the OLED TV market and about 38% in 2021.

2017년 OLED TV의 해 될까?

16일 미국 소비자 전문 매체인 컨슈머리포트는 TV 평가 부분에서 LG Signature TV W에 89점을 부여했다. 이는 역대 최고점으로써 지난 4월 ‘지금 구입해야 할 최고의 4K TV(Best 4K TVs to Buy Right Now)’부문에서 88점으로 1위한 LG OLED TV(OLED65C7P)를 제친 것이다.

 

LG Signature TV W는 OLED 패널 뿐만 아니라 특수한 디자인의 마감 소재가 적용되어 두께가 최소화(벽걸이 TV 거치대 포함 4mm)되었으며, 화면 이외의 불필요한 요소가 제거해 몰입도를 극대화시킨 제품이다. 이로 인해 LG Signature TV W는 지난 CES 2017에서 ‘최고상(Best of the Best)’과 ‘최고 TV상(Best TV Product)’을 수상하였으며, 엔가젯으로부터 ‘예술작품에 가까운 아름다운 TV’ 라는 평을 들은 바 있다.

<LG Signature TV W 출처: mybroadband>

한편, 2위에는 LG 울트라 OLED TV와 Sony의 OLED TV가 차지하였다. 컨슈머리포트가 선정한 TV 1위에서 10위까지 11개의 모델을 살펴보면, 11개 모델 중 10개가 OLED 패널이 적용된 TV인 반면 LCD가 적용된 TV는 Sony의 BRAVIA 뿐이었다.

 
이처럼 OLED TV는 뛰어난 화질 등으로 소비자들의 많은 관심을 받고 있다. 지난 3월 유비리서치가 주최한 제 3회 OLED Korea Conference에서 LG Display의 윤수영 상무는 “Best buy에서 OLED TV 전시 위치가 코너에서 매장 중심으로 이동했다”며, OLED TV가 premium TV 시장에서 주류가 되어가고 있음을 언급했다. 이에 따라 다수의 후발업체들도 OLED TV 진영에 가세하여 제품을 출시하거나 출시 할 계획을 밝히고 있다.

 
Toshiba는 지난 3월 55인치와 65인치 OLED TV Regza를 출시하였으며, 독일의 명품 AV 브랜드 Loewe도 지난 5월 1일 55인치와 65인치 4K 해상도 OLED TV 신제품 Bild 9 시리즈를 출시하며 본격적으로 premium TV 시장에 OLED TV 제품이 출시되기 시작하였다.

 
또한, CES 2017에서 처음으로 OLED TV를 선보여 큰 화제를 모은 Sony는 지난 5월 8일 공식적으로 4K BRAVIA OLED TV A1E 시리즈 중 55인치와 65인치를 6월부터 일본에서 판매하겠다고 밝혔으며, Panasonic도 지난 5월 14일 4K OLED TV인 EZ900과 950, 1000을 6월에 일본에서 선 판매한다고 발표했다.

<Sony의 4K BRAVIA OLED TV A1E 출처: Sony blog>

한편, 지난 유비리서치의 이충훈 대표(수석 애널리스트)는 4월 Topic 세미나에서 Sony의 OLED TV가 2017년 약 40만대가 판매될 것으로 분석하였다. 이에 따라 Sony의 OLED TV는 2017년 전체 OLED TV 시장에서 약 27%의 점유율을, 2021년에는 약 38%의 점유율을 차지할 것으로 전망한 바 있다.

International TADF Workshop Opening

<Source : 2nd International TADF Workshop>

The International Workshop on the third generation of light emitting material technology, TADF (Thermally Activated Delayed Fluorescence) technology, which links first-generation fluorescent material technology and second-generation phosphorescent material technology, will be held at Kyushu University from July 19 to 21, 2017

In order to push the LCD, which is now the flagship product of the display market replacing the cathode-ray tube completely in the market, it is necessary to have a high-efficiency, low-cost OLED that can be used in mid/low-priced products. A solution to solve both high efficiency and low cost depends on the commercialization of retarded fluorescent materials.

Currently, the light emitting materials are classified into red, green, and blue host materials and dopant materials of respective colors. Among these materials, red and green use phosphorescent materials that internal efficiency is theoretically 100%, but blue materials still use fluorescent materials that internal efficiency is only 25%. Due to the limit of blue material efficiency, large OLED panels for TV have a structure in which blue layers are laminated twice, so material cost is very high.

TADF is the material that is being developed to overcome the limitations of current OLED emissive materials.

In the International TADF Workshop, headed by Professor Adachi of Kyushu University, who brought TADF technology to the world for the first time, worldwide experts of third-generation OLED lighting material development gather. Professor Adachi implied that the interest in TADF is getting hotter around the world looking from that 3 years later he published a TADF thesis for the first time in 2012 at Kyushu university approximately 120 papers published worldwide in 2015 and there are more than 200 papers published in 2016.

Professor Adachi said that the meaning of the TADF Workshop this time is to discuss with experts about the current TADF reach and future development.

International TADF Workshop 개최

<출처 : 2nd International TADF Workshop>

 

 

1세대 형광재료 기술과 2세대 인광재료 기술을 잇는 3세대 발광재료 기술인 지연형광 (TADF, Thermally Activated Delayed Fluorescence) 기술에 대한 International Workshop이 2017년 7월 19~21일 Kyushu대학에서 개최된다.

브라운관을 대체하여 현재 디스플레이 시장의 주력 제품으로 자리 잡은 LCD를 완전히 시장에서 밀어내기 위해서는 중저가 제품에도 사용될 수 있는 고효율의 저비용 OLED가 반드시 필요하다. 고효율과 저비용을 동시에 해결하기 위한 솔루션이 지연형광 재료 상용화에 달려 있다.

현재 생산되고 있는 발광재료는 적색과 녹색, 청색 호스트 재료와 각 색의 도판트 재료로 구분된다. 그리고 이들 재료 중에서 적색과 녹색은 내부 효율이 이론적으로 100%인 인광 재료를 사용하지만 청색 재료는 내부 효율이 25%에 불과한 형광재료를 아직 사용하고 있다. 청색 재료 효율 한계 때문에 TV용 대형 OLED 패널은 청색층이 2회 적층되는 구조를 가지고 있어 재료비가 매우 많이 소요된다.

현재의 OLED 발광재료가 가진 한계를 극복하기 위해 개발되고 있는 재료가 바로 TADF이다.

TADF 기술을 최초로 세상에 나오게 한 Kyushu 대학의 Adachi 교수가 회장을 맡고 있는 International TADF Workshop에는 전세계 3세대 OLED 발광재료 개발 전문가들이 모인다.  Adachi 교수는 Kyushu대학에서 2012년에 처음으로 TADF 논문을 발표하고 난 후 3년만인 2015년에는 전세계에 약120편이 발표되었으며 2016년에는 200편 이상의 논문이 나오고 있어 전세계에서 TADF에 관한 관심이 점점 뜨거워지고 있음을 시사했다.

Adachi교수는 이번 TADF Workshop 개최 의미는 현재 TADF의 도달점과 향후 어떻게 개발이 진행될지에 대해 전문가들과 토론하기 위함이라고 밝혔다.

머크, SID 2017에서 디스플레이를 위한 미래지향적인 소재 공개

머크는 21일 개최되는 SID Display Week 2017에서 새로운 디스플레이 기술과 향후 진행될 프로젝트를 공개할 예정이라 밝혔다.

이와 더불어 머크는 ‘The Perfect Pixel – Advanced materials for display and beyond’를 주제로 광범위한 제품 및 서비스 포트폴리오를 전시할 예정이다.

머크의 디스플레이 재료사업부 총괄 책임자인 Michael Heckmeier는 “우리는 고객과의 긴밀한 관계를 통해, 디스플레이의 기술뿐만 아니라 품질과 신뢰성, 서비스를 점차 향상시키고 있다”고 말했다.

또한, Michael Heckmeier 총괄 책임자는 “지속적인 개발을 통해 선도업체로의 입지를 더욱 확고히 할 것”이며, “환경 친화적이고 보다 더 효율적인 생산 프로세스를 개발함으로써 최종 소비자에게 보다 나은 경험을 제공 할 것”이라며 앞으로의 계획을 밝혔다.
이를 위해 머크는 “디자인의 제약이 없거나, 유연함, 또는 색재현성, 명암비, 에너지 효율이 높은 디스플레이 외에도 액정 윈도우(liquid crystal window, LCW) 모듈과 같은 혁신 제품에 초점을 맞출 수 있다”고 덧붙였다.

 

<OLED Display, 출처: Merck>

머크는 SID 컨퍼런스에서 ink-jet printing용 soluble 재료 개발 현황에 대해 발표할 예정이다.

머크에 따르면 ink-jet printing으로 만든 red와 green 층은 진공 증착 기술로 만든 것과 유사한 효율을 보이고 있다. Ink-jet printing 방식은 Gen8이상 원장에서 RGB pixel 구조의 대면적 OLED panel 구현이 가능하고, 재료사용효율이 높고 단순한 layer로 개발되고 있어 양산 성공 시 원가절감이 가능하다는 장점이 있기 때문에 이에 대한 귀추가 주목된다.

한편, 머크는 지난 OLED Korea Conference에서 soluble 재료에 대해, “Red는 16.4%의 발광효율과 LT95 2,000h의 수명을, green은 18.7%의 발광효율과 LT95 8,000h의 수명을, blue는 7.5%의 발광효율과 LT95 500h의 수명(1,000cd/m2 기준)을 보이고 있다” 며, “11% 이상의 발광 효율을 갖는 형광 blue dopant와 밝기가 20cd/A 수준으로 향상 된 인광 deep red dopant, 밝기가 80cd/A 수준으로 향상 되고 roll off를 갖는 인광 green dopant를 개발하는 것”이 목표라 말한 바 있다.

 

Merck, introducing future-oriented material for the display in SID 2017

Merck said new display technologies and upcoming projects will be presented at SID Display Week 2017

In addition, Merck will exhibit a broad portfolio of products and services under the theme of ‘The Perfect Pixel – Advanced materials for display and beyond’.

“We are gradually improving not only display technologies but also quality, reliability and service through our close relationship with our clients,” said Michael Heckmeier, General Manager of Display Materials Business at Merck.

He also revealed the future plan, saying “continuous development will further solidify our market position as a leading company. We will provide a better product experience for end-user by developing eco-friendly and efficient production processes. ”

To this end, Merck added, “apart from unrestricted designing, flexibility, or color gamut, contrast and energy efficiency, we can focus on innovative products such as liquid crystal window (LCW) module.”

<OLED Display, source: Merck>

At the SID conference, Merck will present the development status of soluble materials for ink-jet printing.

According to Merck, red and green layers made with ink-jet printing have shown efficiency similar to those made with vacuum deposition technology.
Ink-jet printing approach can realize a large-sized OLED panel bigger than Gen8 with RGB pixel structure; it is developed as a simple layer with high material utilization efficiency, which is cost effective in mass production.

At the OLED Korea Conference, Merck said, “Red shows a 16.4% luminescence efficiency and LT95 2,000h long life expectancy; for green 18.7% and LT95 8,000h; blue 7.5% LT95 500h (based on 1,000cd/m2). He once said that the corporate goal is to develop a fluorescent blue dopant with  luminous efficiency higher than 11%, a phosphorescent deep red dopant improving from 20 cd/A brightness to 80 cd/A and phosphorescent green dopant with improved roll off.”

Sony’s OLED TV, its full-fledged sales operation to start from June 10th

Sony announced on the 8th May that two models (55” and 65”) of the 4K BRAVIA OLED TV A1E series shown last Jan at CES 2017 will be launched in Japan as from June 10. Sony’s BRAVIA OLED TV is equipped with LG Display’s WRGB OLED, 4K high-definition processor X1 Extreme and acoustic surface technology which directly generates sound with the screen vibrating. A ball park price for 55-inch is 500,000 yen and for 65-inch, 800,000 yen. Sony is also planning to release 77-inch wide TV which will be expectedly launched this autumn.

The CEO of Ichiro Takagi Sony Visual products talked about the OLED TV strategies, saying ” OLED panels as well as premium models using the X1 Extreme will offer the best screen quality, sound and immersive experience”.

The Sony’s OLED TV launch is expected to bring great impact on the premium TV market currently predominated by Samsung Electronics and LG Electronics. LG Electronics, expected to compete directly with Sony, is planning to introduce new OLED TVs at a lower price than last year; the focal point is how Sony’s OLED TV will affect the commercialization of OLED TV and display industry.

In line with it, Mr. Lee, Choong Hoon, the CEO of UBI research has foreseen at the Topic seminar last April held in the conference center of Yeouido JeonKyungYeon Hall on 21st April 2017 that Sony’s OLED TV will account for about 27% of the total OLED TV market with approx. 400,000 sets to be sold in 2017, and 38% of the total OLED TV market with 3.4 million sets in 2021.

 

<OLED TV market prospect>

 

Sony의 OLED TV 6월 10일부터 본격적인 판매 시작

Sony Sony Sony Sony Sony Sony

Sony는 지난 1월 CES 2017에서 선보인 4K BRAVIA OLED TV A1E 시리즈 중 55인치와 65인치 2종을 일본에서 6월 10일부터 판매한다고 8일에 밝혔다. 이번에 발매 될 Sony의 BRAVIA OLED TV에는 LG디스플레이의 WRGB OLED와 4K 고화질 프로세서 X1 Extreme과 화면이 진동하면서 직접 소리를 내는 Acoustic Surface 기술이 적용 되었다. 예상 판매가는 55인치가 50만엔, 65인치는 80만엔으로 책정되었다. Sony는 77인치의 발매도 계획 중에 있으며, 예상 판매 시기는 올 가을이다.

Ichiro Takagi Sony 비주얼프로덕츠 사장은 “OLED 패널과 X1 Extreme을 사용한 premium 모델을 통해 최고의 화질과 음향, 그리고 새로운 몰입감을 제공 할 것”이라며 OLED TV 전략에 대해 이야기했다.

Sony의 OLED TV 출시는 현재 삼성전자와 LG전자가 주도하고 있는 premium TV 시장에 큰 파장을 일으킬 것으로 예상된다.
Sony와 직접적인 경쟁을 하게 될 LG전자는 올해 출시한 OLED TV 신제품을 작년보다 낮은 가격에 책정하는 등의 전략을 펼치고 있어, Sony의 OLED TV 출시가 OLED TV 대중화와 디스플레이 산업에 어떠한 영향을 미칠지 관심이 집중될 수 밖에 없다.

한편, 지난 4월 21일 여의도 전경련회관 컨퍼런스센터에서 열린 4월 Topic 세미나에서 유비리서치의 이충훈 대표(수석 애널리스트)는 Sony의 OLED TV가 2017년 약 40만대가 판매되어 전체 OLED TV 시장에서 약 27%의 점유율을 차지하고, 2021년에는 약 340만대가 판매되어 약 38%의 점유율을 차지할 것으로 전망한 바 있다.

<OLED TV 시장 전망>

Fraunhofer FEP, OLED 마이크로 디스플레이를 이용한 고정밀 광학 지문 센서 개발 성공

Fraunhofer FEP는 지난 5월 4일 보도자료를 통해 OLED 마이크로 디스플레이를 이용한 고정밀 광학 지문 센서 개발에 성공하였다고 밝혔다. Fraunhofer FEP는 OLED-on-silicon 기술을 기반으로 다양한 용도에 적용할 수 있는 OLED 마이크로 디스플레이를 개발해 온 회사로, OLED-on-silicon 기술은 마이크로 칩에 OLED를 광원으로 하여 고정밀도로 설계가 가능하며, 포토 다이오드와 같은 추가적인 센서와 함께 통합이 가능하다.

이번에 Fraunhofer FEP가 개발한 지문 센서는 빛을 방출하고 탐지하는 양방향 기능(bidirectional functionality)을 사용하여, 손가락을 비추고 반사 된 빛을 감지하고 분석하는 방식이다.

Fraunhofer FEP의 OLED 마이크로 디스플레이와 센서 부서 차장인 Bernd Richter는 “이 지문 센서 칩에는 매우 얇은 봉지층을 적용하였다”며, “손가락과 이미지 센서 사이의 거리가 최소화되고 지문을 잘 캡쳐 할 수 있어, 이 응용 분야에는 추가적인 imaging optic이 필요하지 않다”고 말했다.

첫 번째 프로토 타입은 FBI에서 일반적으로 요구하는 해상도보다 3배 뛰어난 1600dpi의 기본 해상도를 가지고 있다. 이 높은 공간 분해능은 매우 작은 땀 구멍 까지 식별이 가능하여 보안을 강화하는 데 사용될 것으로 기대를 모으고 있다.

이 지문 센서는 일반적으로 사용 되는 정전용량식 지문 센서와 비교하여 높은 해상도로 식별이 가능하기 때문에, 소위 ‘spoofing’이라 불리는 거짓 지문에 덜 취약하여 모바일 장치에서 사용자 확인에 사용 될 것으로 전망된다. 또한, 브랜딩이나 로고, 알림을 표시하는 디스플레이에도 사용 될 것으로 전망된다.

Fraunhofer FEP가 개발한 이 지문센서는 이번 미국 LA에서 개최되는 SID Display Week 2017에서 공개 될 예정이다.

 

<고해상도 OLED-on-silicon 지문 센서, Source: Fraunhofer FEP>

Fraunhofer FEP develops OLED microdisplays as high-precision optical fingerprint sensors

Reporter : Hana Oh(HanaOh@ubiresearch.com)

Fraunhofer FEP has been developing various application-specific OLED microdisplays based on OLED-on-silicon technology successfully for many years. This unique technology enables the high-precision integration of an OLED as light source on a microchip. Moreover this microchip can be designed with further sensor elements, e.g. photodiodes. By this, objects can be illuminated and at the same time the reflected light detected and analyzed. Such microdisplays can be integrated into interactive data eyeglasses as a “bi-directional microdisplay”: the tiny display projects the information for augmented-reality applications whereas the camera function detects the viewing direction – thus the content can be controlled by eye-movements.

The fingerprint sensor uses this bidirectional functionality of light-emission and –detection as well: the finger gets illuminated and the reflected light will be detected and analyzed.

Bernd Richter, deputy division manager for OLED microdisplays and sensors at Fraunhofer FEP explains: “We have used an extra-thin encapsulation for the chip of this fingerprint sensor. Thereby the distance between finger and image sensor has been minimized and the fingerprint can be captured excellently. Thus, an additional imaging optics is not necessary for this application.”

The first prototype has a native resolution of 1600 dpi – this is three times more than typically required by the FBI. This high spatial resolution enables the identification even of smallest sweat pores beside the typical papillary lines, which can be used to increase the security.

One of the most promising applications of this new kind of sensor is the user verification in mobile devices. Because of the particularly high resolution in comparison to the typically used capacitive fingerprint sensors these devices are much less vulnerable to so-called spoofing (the manipulation by “false fingers”).

Another nice side effect is the opportunity for using the active area as a normal display e.g. for branding, displaying logos or notifications.

 

<High resolution OLED-on-silicon fingerprint sensor, Source: Fraunhofer FEP>

 

Competitiveness of AMOLED emitting materials companies

UBI Research analyzed the competitiveness of major 9 emitting materials companies based on their sales figures of 2016, the number of applied or registered patents in Korea, the number of the materials being supplied to the products of display companies, and 2017 forecast revenue. (Source: 2017 AMOLED Emitting Material Market Report, UBI Research)

 

<Graph of the Analysis on the Competitiveness of Major Emitting Material Companies>

 

The result showed that the highest competitive company was Doosan. The reason for this is that it has the greatest sales performance and the highest number of manufactured products, and its patent activity is second largest after LG Chemical. Doosan has straightly increased 7 steps, in comparison with the order analyzed last year.

The second highest competitive company is Samsung SDI, followed by UDC. By adopting flexible AMOLED for Galaxy S8 red phosphorescence host, Duksan Neolux has increased 3 steps from the last year to rank number 4.

발광재료 업체 경쟁력

 

<주요 발광재료 업체 경쟁력 분석 그래프>

유비리서치에서 주요 발광재료 업체 9개사의 2016년 매출 실적과 한국에 출원 또는 등록된 특허 수,디스플레이 업체 양산 제품에 공급중인 재료 종류 수, 2017년 예상 영업력을 바탕으로 경쟁력을 분석하였다.

 

이 결과 2017년에 가장 경쟁력이 높은 업체는 두산으로 나타났다.두산의 경쟁력이 1위로 나타난 이유는 2017년 영업력과 양산제품 수가 가장 높고 특허 활동이 LG화학에 이어 두번째로 높기 때문이다.두산은 2016년에 분석한 순위 대비 7단계나 수직 상승하였다.

경쟁력이 두번째로 높은 업체는 삼성SDI이며 세번째는 UDC로 나타났다.덕산네오룩스는 갤럭시S8용 flexible OLED에 적색 인광 호스트가 채택되어 2016년 대비 순위가 3단계 상승하여 4위로 나타났다.

 

 

 

AMOLED용 발광재료 시장 1조원 시대 눈앞

AMOLED를 사용하는 갤럭시S시리즈의 성공에 이어 애플의 iPhone 마저 flexible AMOLED를 기본 디스플레이로 사용하게 되자 중국의 스마트폰 업체들의 AMOLED 수요가 폭증하고 있다.

MWC2017에서 13개 업체가 AMOLED를 채택한 스마트폰을 전시하였다. 세계 최대 스마트폰 시장인 중국에서 시장 점유율을 확장하고 있는 Huawei, Oppo, Vivo, Xiaomi, ZTE 등이 AMOLED 폰 채택에 적극적이다.

 

<MWC에 참여한 AMOLED 스마트폰 업체 수>

 

이러한 시장 상황에 힘입어 AMOLED용 발광재료 시장은 올해 1조원에 육박할 예정이다.

유비리서치의 장현준 선임연구원은 발광재료 가격이 매년 5~10%씩 가격이 하락하는 것을 감안하고 발광재료 리사이클율을 5~30%로 가정하여 계산했을 때 2017년 발광재료 시장은 9.6억달러에 도달하며 2021년은 33.6억달러 규모로 확대 될 것으로 전망했다.

 

<발광재료 시장 전망>

 

장현준 선임연구원에 의하면 2021년 전체 AMOLED 발광재료 시장 33.6억달러 중에서 애플향AMOLED발광재료 시장이 5.6억달러를 차지할 것으로 전망하였고, 한국이 AMOLED 패널 시장을 주도함에 따라 발광재료 시장 역시 한국이 70%를 차지하며 23.8억달러의 시장이 형성될 것으로 예상하였다.

Expect to hit 1 trillion won in AMOLED emitting material market

Following the success of Galaxy S Series using AMOLED, Apple’s iPhone has started to use flexible AMOLED as its basic display, resulting in the spike in demand for Chinese smartphone companies’ AMOLED.

At MWC2017, 13 companies showcased AMOLED-based smartphones. The companies whose market share is expanding in China, the world’s biggest smartphone market, such as Huawei, Oppo, Vivo, Xiaomi, and ZTE are active to adopt AMOLED smartphone.

 

<The Number of AMOLED Smartphone Companies at MWC>

 

With this market trend, the emitting material market for AMOLED is expected to reach 1 trillion won this year.

Hyun Jun Jang, senior researcher of UBI Research forecast that the emitting material market will reach $960 million in 2017 and increase to $33.6 billion in 2021.

<Emitting Material Market Forecast>

 

According to Hyun Jun Jang, senior researcher, Apple’s AMOLED emitting material market is expected to account for $560 million among $33.6 billion of total emitting material market, and Korea will capture 70% as it is leading the AMOLED panel market while creating a 23.8 billion-dollar market.